Husqvarna Automower 550 EPOS Operator's Manual page 21

3.9.3.2 Weather timer
Weather timer automatically adjust the cutting time to
the growth of the grass. The product is not permitted to
operate more than the schedule settings.
Note:
Weather timer , it is recommended
When using
to make as much operating time as possible available
Weather timer . Do not restrict the schedule more
for
than necessary.
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
Weather timer selects if the product will
and then
continue to operate or not.
Note:
Weather timer is reset if the product does not
operate for more than 50 hours, or if a
settings is done. Weather timer is not changed if a Reset
of schedule settings is done.
3.9.3.3 ECO mode
ECO mode is enabled, it switches off the signal in the
If
charging station, when the product is parked or is
charging.
Note:
ECO mode to save energy and prevent
Use
interference with other equipment, for example hearing
loops or garage doors.
Note:
To start the product manually in the work area,
push the STOP button before you remove the product
from the charging station. If not, the product cannot park
at the charging station.
3.9.4 Accessories
1576 - 004 - 16.11.2021
Settings for accessories mounted on the product can be
made in this menu.
3.9.4.1 Headlights
There are 4 different headlight settings that control when
the headlights are on:
Always on
•
Evening only (19:00-00:00)
•
Evening and night (19:00-07:00)
•
• Always off
The headlight can be set to flash or to have a constant
light. The headlights can also be set to flash if there is
an error.
Note:
at night time.
3.9.4.2 To avoid collisions with the Automower
When this option is enabled, the wear on the product
and the Automower
in more uncut grass around the charging station.
3.9.5 General (Bluetooth
This function is used to set time and date, or to reset to
default settings.
Reset of all user
3.9.5.1 Time & date
The time and date can be changed manually, or by
using the time and date from the mobile device.
3.9.5.2 Reset to factory settings
The user settings can be reset to factory settings. All
map objects and the schedules will be deleted.
Note:
Time will not be reset.
3.9.6 Security (Bluetooth
The security settings controls the PIN code, the
GeoFence and other security functions. The correct PIN-
code must be entered to get access to the
menu in the Automower
Husqvarna recommends to use the headlights
®
house is reduced, but it can result
®
only)
PIN code, Loop signal, Messages and Date &
®
only)
®
Connect app.
®
house
Security
Installation - 21