Pictbridge Compliant Printer - Sony DSC-W200 Handbook

Cyber-shot w200 - powerful camera finished in smart silver aluminium, with 12.1 effective megapixels, hd output, double anti-blur and face detection technologies, zeiss 3x optical zoom lens, 2.5-inch lcd screen, viewfinder and stamina battery life.
Hide thumbs Also See for DSC-W200:
Table of Contents

Advertisement

Troubleshooting
Cannot print images with the date.
Using "Picture Motion Browser", you can print images with date (page 92).
This camera does not have a feature for superimposing dates on images. However, because
the images shot with the camera include information on the recording date, you can print
images with the date superimposed if the printer or the software can recognize Exif
information. For compatibility with Exif information, consult the manufacturer of the printer
or the software.
When you print images at a shop, images can be printed with the date if you ask them to do so.

PictBridge compliant printer

A connection cannot be established.
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
Check that the printer is turned on and can be connected to the camera.
Set [USB Connect] to [PictBridge] (page 67).
Disconnect and connect the cable for multi-use terminal again. If an error message is
indicated on the printer, refer to the operating instructions supplied with the printer.
Cannot print images.
Check that the camera and the printer are properly connected using the cable for multi-use
terminal.
Turn on the printer. For further information, refer to the operating instructions supplied with
the printer.
If you select [Exit] during printing, images may not be printed. Disconnect and connect the
cable for multi-use terminal again. If you still cannot print your images, disconnect the cable
for multi-use terminal, turn the printer off and then on, then connect the cable for multi-use
terminal again.
Movies cannot be printed.
Images shot using cameras other than this camera or images modified with a computer may
not be printed.
Printing is canceled.
Confirm that you have disconnected the cable for multi-use terminal before the
(PictBridge Connecting) mark disappears.
Cannot insert the date or print images in the index mode.
The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
112

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc-w80Cyber-shot dsc-s600Cyber-shot dsc-w200Cyber-shot dsc-w200s

Table of Contents