Sony DSC-W200 Handbook page 106

Troubleshooting
The flash does not work.
The flash is set to
•
You cannot use the flash when:
•
[REC Mode] is set to [Burst] or Exposure Bracket (page 42).
–
(High Sensitivity mode) or
–
(Fireworks mode) is selected in the Scene mode (page 30).
Shooting movies.
–
Set the flash to
•
(Beach mode), or
Fuzzy white circular spots appear in images shot using the flash.
Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This
•
is not a malfunction (page 13).
The close-up shoot function (Macro) does not work.
(Twilight mode) or
•
mode (page 30).
The date and time are not displayed on LCD screen.
While shooting, the date and time are not displayed. They are displayed only during playback.
•
Cannot insert dates on image.
This camera does not have a feature for superimposing dates on images (page 112). By using
•
"Picture Motion Browser", you can print or save images with the date (page 92).
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 44).
•
The screen is too dark or too bright.
Adjust the brightness of the LCD backlight (page 20).
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 45) or adjust the exposure (page 44).
Turn on the screen (page 20).
•
The image is too bright.
Adjust the exposure (page 44).
•
106
(Flash forced off) (page 26).
(Twilight mode) or
(Flash forced on) when the mode dial is set to M or
(Snow mode) is selected in the Scene mode (page 26).
(Landscape mode) or
(Extra High Sensitivity mode) or
(Fireworks mode) is selected in the Scene
(Landscape mode),