Mercedes-Benz GLK 300 4MATIC 2012 Owner's Manual page 243

Displays and operation (12-button multifunction steering wheel)
240
Press the : or 9 button to select the
X
Brightness Display/Switches: Brightness Display/Switches:
tion.
You will see the selected setting.
Press a to confirm.
X
Press the : or 9 button to adjust the
X
brightness to any level from
Level 5 Level 5 (bright).
Press the a or % button to save the
X
setting.
Switching the Intelligent Light System
on/off
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light Light submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Intell. Light Sys. Intell. Light Sys.
If the Intell. Light Sys. Intell. Light Sys.
been switched on, the cone of light and the
L symbol in the multifunction display
are shown in red.
Press the a button to save the setting.
X
When you activate
you activate the following functions:
motorway mode
R
active light function
R
cornering light function
R
extended range foglamps
R
If you set the dipped-beam headlamps for
driving on the right/left, the multifunction
display shows the
System inoperative Inactive for System inoperative Inactive for
left-side traffic left-side traffic
System: System: System System inoperative
for right-side for right-side traffic
instead of the Intell. Light Intell.
in the Light Light submenu.
Further information on the Intelligent Light
System ( page 114).
Y
func-
Level 1 Level 1
Settings Settings menu.
function.
function has
Intell. Light Intell. Light Sys. Sys.,
Intell. Light Intell. Light System: System:
or Intell. Light Intell. Light
inoperative Inactive Inactive
traffic display message
Light Sys. Sys. function
Switching Adaptive Highbeam Assist on/
off
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light Light submenu.
to
Press a to confirm.
X
Press the : or 9 button to select the
X
Adapt. main beam Adapt. main beam
If the Adapt. main beam Adapt. main beam
been switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
Press the a button to save the setting.
X
For further information about Adaptive High-
beam Assist, see (
Activating/deactivating the surround
lighting and exterior lighting delayed
switch-off
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light Light submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Surround lighting Surround lighting
When the Surround lighting Surround lighting
activated, the light cone and the area
around the vehicle are displayed in red in
the multifunction display.
Press the a button to save the setting.
X
Deactivating delayed switch-off of the exte-
rior lighting temporarily:
Before leaving the vehicle, turn the key to
X
position 0 in the ignition lock.
Turn the key to position 2 in the ignition
X
lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
Settings Settings menu.
function.
function has
page 116).
Y
Settings Settings menu.
function.
function is