Mercedes-Benz GLK 300 4MATIC 2012 Owner's Manual page 136

THERMOTRONIC automatic climate
control
THERMOTRONIC automatic climate control zones
You can select different temperature settings
for the driver's and front-passenger sides as
well as for the rear compartment.
Turn the key to position 2 in the ignition
X
lock.
To increase/reduce the temperature in
X
the front: turn controls : and B clock-
wise or anti-clockwise (
Only change the temperature setting in
small increments. Start at 22 †.
To increase/reduce the temperature in
X
the rear compartment using the front
control panel: press the á button.
The indicator lamp in the á button goes
out.
Turn control : clockwise or anti-clockwise
X
( page 130).
Y
Only change the temperature setting in
small increments. Start at 22 †.
To increase/reduce the temperature in
X
the rear compartment using the rear
control panel: press the 9 or :
button on the rear control panel.
Only change the temperature setting in
small increments. Start at 22 †.
i
If you leave the vehicle parked for longer
than 30 minutes, the temperature setting
for the rear compartment then switches
back to 22 †.
10 Only for certain countries.
Operating the climate control system
page 130).
Y
Setting the air distribution
Air distribution settings
THERMATIC automatic climate control: the
air distribution can be set individually for the
driver's and front-passenger sides.
¯ Directs the airflow through the demis-
ter vents
P Directs the airflow through the centre
and side air vents
O Directs the airflow through the foot-
well air vents
S Directs the airflow through the centre
and side air vents as well as the foot-
10
well air vents
_ Directs the airflow to the entire vehicle
interior
b Directs the airflow through the centre
and side air vents as well as the demis-
10
ter vents
a Directs the airflow through the foot-
well and demister vents
i
Regardless of the air distribution setting,
airflow is always directed through the side
air vents. The side air vents can only be
closed when the controls on the side air
vents are turned downwards.
Adjusting
Turn the key to position 2 in the ignition
X
lock.
Press the _ button repeatedly until the
X
desired symbol appears in the display.
The indicator lamp in the à button goes
out. Automatic control is deactivated and
the air distribution is controlled according
to the selected setting.
133
Z