Mercedes-Benz GLK 300 4MATIC 2012 Owner's Manual page 119

Table of Contents

Advertisement

Exterior lighting
116
When the Off-road-Lights are switched on,
the active light function is deactivated and
the headlamp range adjustment is set to the
static mode.
Adaptive Highbeam Assist
G
WARNING
Adaptive Highbeam Assist is only an aid
designed to assist driving. The driver is
responsible for adjusting the vehicle's lighting
to the prevailing light, vision and traffic con-
ditions.
The system may be impaired or deactivated:
if there is poor visibility, e.g. due to snow,
R
rain, fog or spray
if the area of the windscreen around the
R
optical sensor is dirty, misted up or covered
up, e.g. by a sticker
The system may not recognise the following
road users:
road users that have no lighting, e.g. pedes-
R
trians
road users that have poor lighting, e.g.
R
cyclists
road users whose lighting is not clearly visi-
R
ble, e.g. road users behind a crash barrier
on rare occasions: road users that have
R
lights that may be recognised too late or not
at all
The automatic main-beam headlamps will not
be deactivated, or they may be activated
despite road users travelling in front of or
approaching the vehicle.
Thus, you could cause an accident and injure
yourself and others. Always observe traffic
conditions and, if necessary, dip the lights
manually.
You can use this function to set the head-
lamps to change between dipped beam and
main beam automatically. The system recog-
nises vehicles with their lights on, either
approaching from the opposite direction or
travelling in front of your vehicle, and conse-
quently switches the headlamps from main
beam to dipped beam.
The system automatically adapts the dipped-
beam headlamp range depending on the dis-
tance to the other vehicle. Once the system
no longer detects any other vehicles, it reac-
tivates the main-beam headlamps.
The system's optical sensor is located behind
the windscreen near the overhead control
panel.
To activate: activate the Adaptive High-
X
beam Assist function using the on-board
computer (
page 240).
Y
Turn the light switch to Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of arrow :
(
page 113).
Y
If it is dark and the light sensor activates
the dipped-beam headlamps, the _
indicator lamp in the instrument cluster
lights up.
If you are driving at speeds above
45 km/h:
the headlamp range is set automatically
depending on the distance between the
vehicle and other road users.
If you are driving at speeds above
55 km/h and no other road users are rec-
ognised:

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents