Chrysler Pacifica 2022 Owner's Manual page 51

Third Row Power Stow 'n Go Seat —
If Equipped
A one-touch power folding seat switch is located in
the right rear trim panel as part of a switch bank.
NOTE:
The third row outboard seat belts may interfere
with the power folding of the seat. Place the seat
belt webbing behind the stow clip before stowing or
opening the seat. When the seat is in the desired
position, remove the webbing from the stow clip so
that it is ready for use. Never leave the seat belt in
the stow clip when it is used to restrain an
occupant.
NOTE:
The outer head restraints will lower automati-

cally as necessary when the power seat begins
to move.
The center head restraint raises and lowers

manually but will not lower automatically.
The head restraint can also be lowered manu-

ally using the pull strap located at the back of
the seat Ú page 54.
The switch is only functional when the liftgate is
open and the vehicle is in PARK.
The rear switch bank allows multiple power folding
and unfolding positions for the third row seats.
Left and right third row seats can be folded
individually or together. The third row power folding
seat adjusts to the following positions using the
switch bank located on the left rear trim panel:
Rear Panel Power Switch Bank
1 — Open To Normal
2 — Stow
3 — Fold Forward/Rearward
4 — Right/Left Seats/Both Seats
To move the selected seat(s) to the normal
(seated) position, push and release the "Normal"
button. The seat will automatically stop when the
Normal position is reached.
GETTING TO KNOW YOUR VEHICLE
To move the selected seat(s) to the stow position,
push and release the "Stow" button. The seat will
automatically stop when the Stow position is
reached.
To move the selected seat(s) back in the forward or
reverse direction, push and hold the "Fold
Forward/Back" button. Release the button when
the desired position is reached.
1. Disconnect the center shoulder belt from the
mini-buckle before attempting to fold/stow
the power third row seats.
2. Before pushing the "Normal" or "Stow" button,
place the outboard seat belt webbing behind
the stow clips, located on the rear trim panel.
When the seat reaches the desired position,
remove the webbing from the clip so it is ready
for use to restrain an occupant.
Seat Belt Stowage Clip
49
2