Chrysler Pacifica 2022 Owner's Manual page 264

262 SAFETY
What is the weight limit (child's weight + weight of the child
restraint) for using the Tether Anchor with the seat belt to attach
a forward facing child restraint?
Can the rear-facing child restraint touch the back of the front
passenger seat?
Can the rear head restraints be removed?
Can the buckle stalk be twisted to tighten the seat belt against
the belt path of the child restraint?
NOTE:
If the folding, non-adjustable head restraint inter-
feres with the installation of the child restraint, the
head restraint may be folded and the child seat
installed in front of it.
Frequently Asked Questions
Weight limit of the
Child Restraint
Yes
Yes
No
WARNING!
Always make sure the head restraint is in its
upright position when the seat is to be used by
an occupant who is not in a child restraint.
Sitting in a seat with the head restraint in its
lowered position could result in serious injury or
death in a collision.
Always use the tether anchor when using the seat belt to install a
forward facing child restraint, up to the recommended weight
limit of the child restraint.
Contact between the front passenger seat and the child restraint
is allowed, if the child restraint manufacturer also allows contact.
The 2nd row head restraints on bench and the center head
restraint in the 8 passenger vehicle can be removed if they
interfere with the installation of the child restraint. 2nd row Stow
'n Go head restraints are not removable. The 3rd row center head
restraint is removable in all vehicles, but the 3rd row outboard
head restraints are not removable Ú page 51.
Do not twist the buckle stalk in a seating position with an ALR
retractor.
Car Seat With Head Restraint Folded
1 — Folded Headrest
2 — Child Restraint