Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Press Wake, Leave, Return or Sleep to select the period
the program will start. (Example: Return = thermostat will
stop the Hold at the Return period start time)
Run
Set Current
Return
Program
Day/Time
Hold Temp
Day
Daylight
Time
Press increase ▲ or decrease ▼ key to adjust the
temperature setting, if desired. (Example: Heat 54° =
heating equipment will operate when the room temperature
is below 54°F)
Set Current
Run
Program
Day/Time
Hold Temp
Day
Daylight
Time
NOTE: When the System is set for Auto, both heat and
cool settings are needed. If the System is set
for Heat, only the Heat setpoint is needed or if
Cool is selected, only the Cool setpoint
is needed.
Press Heat/Cool Settings to change between heat and
cool settings.
Press increase ▲ or decrease ▼ key to adjust the
temperature setting, if desired. (Example: Cool 84° =
cooling equipment will operate when the room temperature
is above 84°F)
NOTE: In this example, the thermostat uses the Hold
setting for eighteen days and returns to the daily
programs at the Return period start time. The
temperature settings are heating 54°F and
cooling 84°F. Only the heating temperature is
used because the System is set for Heat. The
thermostat will use both the heating and
cooling temperature settings when the System
is set to Auto.
Hold for
Time
Set Program
Wake
Leave
Return
Sleep
Heat/Cool
System
Fan
Settings
Copy
Hold for
Time
Set Program
Wake
Leave
Return
Sleep
Heat/Cool
System
Fan
Settings
Copy
15
System
Setting
Days
Fan
Heat
Return
M14657
System
Setting
Days
Fan
Heat
Return
M14658
69-1400–1
Heat
Auto
Heat
Auto
Advertisement
Table of Contents
