Advertisement
Chapter 6 Factory Mode Setting and Items Needs Attention
1. Enter factory menu
Power on TV set, and make LCD at working state:
① Press 【MUTE】 key on remote control；
② Press "MENU" key on remote control, and switch to "SOUND" option with
【V+】,【V-】key；
③ Move cursor to "Balance" option with 【P+】,【P-】key to enter setting status；
④ Press number key "3" 、 "1" 、 "3" 、 "8"on remote control to enter password.
Entering factory mode is then finished. Press【Display】key to quit factory mode.
⑴ Factory menu display is presented like bellow：
chassis：Ls01
Jul 29 2006
23:25:16
Version：LsE01-M32-V1.05WL
I²C off
Clear E²PROM
Panel Control
Factory Setting
System Control
Min/Max CONTROL
White Balance
Hotel Option
E²PROM Edit
Register Edit
Notes： "chassis：LS01"is the model number of local module， "Jul 29 2006
is the latest upgrading time for software， and"Version：LSE01-M32-V1.05WL"is the
version number of current software.
(2)The detailed setting items are given bellow:
Contents of first page：
Setting item
IIC Off
Clear EEPROM
Panel Control
Factory Setting
System Control
Min/Max Control
White Balance
Hotel Option
E²PROM Edit
Register Edit
Use 【P+】and 【P-】keys on remote control to make up or down option, and use【V+】
and【V-】keys to set.
Setting content
Stop I²C bus
"OK"or"V+","V-"key
communication
E²PROM
initialization
Screen back light
Press "V+" , " V-" keys to
brightness control
Press "V+" , " V-" keys to
Factory Setting
System Control
Analog setting of
picture and sound
White balance
setting
Hotel mode
E²PROM data
editing
Register
Setting method
Press "OK" key first， then
press "V-"key
enter submenu
enter submenu
Press "V+" key to enter
submenu
Press "V+" key to enter
submenu
Press "V+" key to enter
submenu
Press "V+" key to enter
submenu
No setting
No setting
23:25:16"
Remark
Used for updating
program
Only done in first
setting station
Only
set
sub
brightness
Bri Mid
Used for hotel TV
39
Advertisement
