Royal R-CAST Owner's Manual And Installation Instructions page 18

Figure 18 - Front Face Removal
B. Removing the Glass
Remove Glass Frame Assembly by
pulling the Latch Releases towards
you and upward. See Figure 19a.
Carefully lift the Glass and Frame
from the unit. See Figure 19b.
Figure 19a
Latch Release
Figure 19b
Removal of Sealed Glass
12-99
R-CAST SERIES WALL FURNACE
C. Positioning the Logs
1. Place the Back Log on the Back Log Support and
position the log all the way to the back of the support.
See Figure 20.
Figure 20 - Positioning the Back Log
2. Place the Front Log directly behind the front por-
tion of the burner tube with the center detent of the
log straddling the tube in the center of the burner
assembly. The Front Log will then rest on the Front
Log Supports. See Figure 21.
Figure 21 - Positioning the Front Log
3. The Top Log lays as shown. Position the top log
in the relief area of the back log and the forward
branch in the locating notch of the front log.
See Figure 22.
18 30750B