Sony RDR-GX220 Operating Instructions Manual page 74

Progressive Mode
DVD software can be divided into two types:
film based software and video based
software. Video based software is derived
from TV and displays images at 25 frames/50
fields (30 frames/60 fields) per second. Film
based software is derived from film and
displays images at 24 frames per second.
Some DVD software contains both Video
and Film.
In order for these images to appear natural on
your screen when output in progressive mode
(50 or 60 frames per second), the progressive
video signal needs to be converted to match
the type of DVD software that you are
watching.
You can fine-tune the progressive 525p/625p
video signal that is output when you set
"Progressive Output" to "On."
Note that you must connect to a progressive
format TV using the COMPONENT VIDEO
OUT jacks (page 12).
Auto
Video
b
Note
When picture noise appears after you set the
recorder to progressive format, hold down x, and
press PROGRAM – (minus) on the unit.
Line1 Input
Sets the method of inputting video signals
from the LINE 1 IN jacks on the rear panel of
the recorder. Select an option for each of the
items below according to the combination of
jacks and methods that you are going to use.
Video
S Video
74
Automatically detects the
software type (Film-based or
Video-based) and selects the
appropriate conversion mode.
Normally select this position.
Fixes the conversion mode to
the mode for Video-based
software.
Inputs video signals.
Inputs S video signals.
Pause Mode (DVDs only)
Selects the picture quality in pause mode.
Auto The picture, including
subjects that move
dynamically, is output with
no jitter. Normally select this
position.
Frame
The picture, including
subjects that do not move
dynamically, is output in high
resolution.
Colour System
Selects the colour system when playing
VIDEO CDs (including Super VIDEO CDs)/
DivX video files.
PAL Plays a disc in PAL colour
system.
NTSC
Plays a disc in NTSC colour
system.
Auto Display
On Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off Displays information only
when DISPLAY is pressed.
Screen Saver
The screen saver image appears when you do
not use the recorder for more than 10 minutes
while an on-screen display, such as the
System Menu, is displayed on your TV
screen. The screen saver image helps prevent
your display device from becoming damaged
(ghosting).
On Turns on the screen saver
function.
Off Turns off the function.