Step 3: Preparing For Network Connection - Sony BDP-S490 Operating Instructions Manual

*1
See "Step 1: Supplied Accessories"
(page 12).
*2
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
*3
Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380;
6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other
U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-
HD and the Symbol together are registered
trademarks & DTS-HD Master Audio is a
trademark of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
Step 3: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to "Step 4: Easy
Setup" (page 16).
Wired Setup
Use a LAN cable to connect to the LAN
(100) terminal on the player.
LAN cable
(not supplied)
Internet ADSL modem/
Cable modem
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
USB Wireless Setup
(BDP-S490 only)
Turn off the player, then connect the
USB Wireless LAN Adapter (UWA-
BR100 as of December 2011) to the
USB jack on the rear of the player.
b
• The USB Wireless LAN Adapter may not be
available in some regions/countries.
• The receiving sensitivity changes depending
on the environment. Use the extension cable
supplied with the USB Wireless LAN
Adapter if necessary.
Wireless LAN
router
Wireless Setup
(BDP-S590 only)
Use the wireless LAN that is built into
the player.
Broadband
router
Wireless LAN
router
USB Wireless LAN Adapter
LAN cable (not supplied)
ADSL modem/
Cable modem
LAN cable (not supplied)
ADSL modem/
Cable modem
Internet
Internet
15