Step 2: Preparing For Network Connection; Step 3: Easy Setup - Sony BDP-S6700 Operating Instructions Manual

Step 2: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to "Step 3: Easy
Setup" (page 18).
Wired Setup
Use a LAN cable to connect to the LAN
(100) terminal on the player.
LAN cable
(not supplied)
Broadband
router
z
The use of a shielded and straight interface
cable (LAN cable) is recommended.
Wireless Setup
Use the wireless LAN that is built into
the player.
LAN cable (not supplied)
Wireless LAN
router
18
ADSL modem/ Internet
Cable modem
ADSL modem/ Internet
Cable modem

Step 3: Easy Setup

When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Initial Settings].
1
Insert two Size AAA (R03)
batteries by matching the 3 and
# ends on the batteries to the
markings inside the battery
compartment of the remote.
2
Connect the supplied AC adaptor
in the numeric order shown
below. When removing them, do
so in reverse order.
1
to DC IN
12 V
AC adaptor (supplied)
to AC outlet
2