Step 2: Preparing For Network Connection; Wired Setup; Step 3: Easy Setup - Sony BDP-S1200 Simple Manual

Step 2: Preparing for
Network Connection

Wired Setup

Use a LAN cable to connect to the LAN (100)
terminal on the player.
LAN cable
(not supplied)
Broadband ADSL modem/
router Cable modem
z
The use of a shielded and straight interface cable (LAN
cable) is recommended.
Wireless Setup (BDP-S3200/
BX320/S5200/BX520 only)
Use the wireless LAN that is built into the player.
LAN cable (not supplied)
Wireless LAN ADSL modem/
router Cable modem
8
Internet
Internet

Step 3: Easy Setup

When turned on for the first time
Wait for a short while before the player turns
on and starts [Easy Initial Settings].
1
Insert two Size AAA (R03) batteries by
matching the 3 and # ends on the
batteries to the markings inside the
battery compartment of the remote.
2
Connect the supplied AC adaptor in
the numeric order shown below.
When removing them, do so in
reverse order.
1
to DC IN
12V
AC adaptor (supplied)
3
Press [/1 to turn on the player.
* Turns on the player, or sets to standby
mode.
to AC outlet
2
.
*