Table of Contents
Advertisement
Connecting video components
The following illustration shows how to
connect video components such as DVD
player, DVD recorder, satellite tuner or VCR.
Satellite tuner
ANTENNA
AM
U
OPT IN
OPT IN
SA-CD/CD
VIDEO 2
C
DVD player/
DVD recorder
A Optical digital cord (not supplied)
B Audio cord (not supplied)
C Coaxial digital cord (orange) (supplied)
Notes
• You cannot do recording on the DVD recorder or
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
A
B
SA-CD/CD
VIDEO 2
VIDEO 1
L
L
R
R
COAX IN
AUDIO IN AUDIO IN
AUDIO IN
DVD
B
If you connect a DVD recorder
Be sure to change the factory setting of the
DVD input button on the remote so that you
can use the button to control your DVD
recorder. For details, see "Changing button
assignments" (page 47).
VCR
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
–
+
–
+
–
+
–
+
FRONT R
FRONT L
SUR R
SUR L
17
GB
Advertisement
Table of Contents
