Table of Contents
Advertisement
Name
Function
R Control
After pressing AMP MENU
buttons
(D), DVD MENU (J), or
MENU (N), press the control
button V, v, B or b to select
the settings. When you press
DVD MENU or MENU, press
the control button to enter the
selection.
S DISPLAY
Press to
– select information displayed
– select information displayed
T -/--
Press -/-- and TV (P) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
Press to select
x
– track numbers over 10 of the
– channel numbers of the
CLEAR
Press to
– clear a mistake when you
– return to continuous
U Numeric
Press to
– preset/tune to preset
buttons
a)
(number 5
)
– select track numbers of the
– select channel numbers of
Press the numeric buttons and
TV (P) at the same time to
select the TV channels.
V 2CH
Press to select 2CH STEREO
mode.
W A.F.D.
Press to select A.F.D. mode.
X AUTO CAL
Press to activate the Auto
Calibration function.
10
GB
on the receiver's display (for
TUNER input only).
on the TV screen of the
VCR, satellite tuner, CD
player, DVD player, or MD
deck.
VCR, satellite tuner, CD
player or MD deck.
Digital CATV terminal.
press the incorrect numeric
button.
playback, etc. of the satellite
tuner or DVD player.
stations.
CD player, DVD player or
MD deck. Press 0/10 to
select track number 10.
the VCR or satellite tuner.
Name
Function
Y TV/VIDEO
Press TV/VIDEO and TV
(P) at the same time to select
the input signal (TV input or
video input).
SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
a)
The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Advertisement
Table of Contents
