Preparation - Canon PowerShot S230 Service Manual

CHAPTER 3. REPAIR INSTRUCTION

3.3.3 Preparation

Before starting up the Adjustment Software, follow the preparatory steps below:
1. Obtain all the tools necessary for the adjustment.
2. For the Optical Unit Adjustment, jot down the data written on the Optical Unit.
You will need it later.
3. Connect the Camera to the Power Source with the Compact Power Adapter CA-PS500, AC Cable &
DC Coupler DR-500.
4. Set the Replay Mode on the camera and turn on.
5. Set the Communication Mode to Normal.
6. Connect the Camera's Digital terminal to the PC's USB Port with INTERFACE CABLE IFC-200
PCU.
7. Turn on the camera.
Note: Perform the preparation in the following order otherwise the camera won't work properly.
Personal Computer
CAMERA BODY
Compact Power Adapter
CA-PS500
3-22
USB
DIGITAL