Canon PowerShot S230 Service Manual page 33

Display specifications
Indicator (Upper)
Indicator (Lower)
AF-assist beam
Power mode indicator
Beep
Interface
Computer I/F
A/V out
Green :
Ready to record / Ready to communicate
(during a computer connection)
Blinking Green :
During power-up camera / Recording to CF card / Reading
CF card / Erasing from CF card / Transmitting data
(during a computer connection)
Orange :
Ready to record (at Flash On)
Blinking Orange :
Ready to record (camera shake warning)
Yellow :
Macro mode / Landscape mode / Focus lock
Blinking Yellow :
Indicates that the focus goes to fixed point because the actual
focus point is not found.
Lights :
Low-contrast objects, low-light conditions and red-eye
reduction on while SW1 on.
Blinks :
During count down of self-timer.
The AF-assi st Beam blinks at 2 Hz for the first 8 seconds and at
8 Hz for the last 2 seconds (9th and 10th seconds) and then turns
off. (If the red-eye reduction is on, it lights instead of blinking for
the last 2 seconds.)
Green: Power On
Single sound (twice) : Ready to record
Single sound (once)
Single sound (6 times) : Warning (CF card full or not inserted
Continuous sound
Intermittent sound
* Sounds (excluding when CF card slot cover/battery cover is
open and CF card is not inserted in camera) can be set on or off.
USB * : Normal / PTP
Video : NTSC/PAL
Audio : Monaural
1-27
: Button operations, complete shooting
(shutter off) and warning of off-focus.
in camera)
: Warning (CF card slot cover / battery
cover was opened while recording to CF
card.)
: Count-down of self-timer.