Sony HT-DDWG700 Operating Instructions Manual page 19

If you connect a DVD player or
Blu-ray disc player
• Be sure to change the factory setting of the
DVD/BD input button on the remote so that
you can use the button to control your DVD
player or Blu-ray disc player. For details, see
"Changing button assignments" (page 55).
• You can also rename the DVD/BD input so
that it can be displayed on the receiver's
display. For details, see "Naming inputs"
(page 53).
Notes on HDMI connections
• The sound is output from the TV speaker
only when a playback component and this
receiver, as well as this receiver and the TV
are connected via an HDMI jack.
To output the sound from the supplied
speakers and to take advantage of the multi
channel surround sound, be sure to
– connect the digital audio jacks on the
playback component to the receiver.
– turn off the TV's volume or activate the
TV's muting function.
• This receiver may not be able to transfer
video or audio signals with certain types of
components.
• The multi/stereo area audio signals of a
Super Audio CD are not output.
• Be sure to turn on the receiver when the
video and audio of a playback component
are being output to a TV via the receiver.
Unless the power is turned on, neither video
nor audio signals will be transmitted.
• Check the setup of the connected component
if the image is poor or the sound does not
come out of a component connected via the
HDMI cable.
• Video signals input to the HDMI IN jack can
only be output from the HDMI OUT jack.
• Refer to the operating instructions of each
component connected for details.
Notes on digital audio
connection
• When connecting optical digital cords, insert
the plugs straight in until they click into
place.
• Do not bend or tie optical digital cords.
• All the digital audio jacks are compatible
with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz
sampling frequencies.
19 GB