Table of Contents
Advertisement
No.
Component
1
Daisy Chain Port
2
KVM Port Section
3
Grounding Terminal
4
Power Socket
5
Power Switch
6
LAN Port
7
Console Port
When Daisy Chaining Units (see Daisy Chaining,
page 21), the daisy chain cable plugs in here.
The KVM cables that link to the computers plug in
here.
Note: The shape of these 15-pin connectors has been
specifically modified so that only custom KVM cables
designed to work with this switch can plug in.
(See Cables, page 6, for details.) Do NOT attempt to
use ordinary 15-pin VGA connector cables to link
these ports to the computers.
The grounding wire used to ground the KN9008 /
KN9016 attaches here.
The power cable plugs in here.
This standard rocker switch powers the unit on and off.
The cable that connects the KN9008 / KN9016 to the
Internet, LAN, or WAN plugs in here. The LED on the
left side of the port indicates data transmission speed:
Orange for 10 Mbps; Green for 100 Mbps. The LED on
the right side of the port flashes Green when the
switch is being accessed remotely.
The custom Console Cable set that connects the
console monitor, keyboard, and mouse to the switch
plugs in here.
Chapter 1. Introduction
Description
11
Advertisement
Table of Contents
