Using An S-Air Product - Sony DAV-DZ680 Operating Instructions Manual

Using an S-AIR Product

The unit is compatible with the S-AIR function
(page 110), which allows sound transmission
between S-AIR products.
When you purchase the S-AIR product, you
need to perform the following settings to
establish the sound transmission.
About S-AIR products
There are two types of S-AIR products.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier: You can enjoy
surround speaker sound wirelessly.
– S-AIR receiver: You can enjoy system
sound in another room.
Room A
S-AIR sub unit
(surround amplifier)
Room B
80
GB
S-AIR main unit
S-AIR sub unit
(S-AIR receiver)
Inserting the wireless
transmitter/transceiver
To make use of the S-AIR function, you need to
insert the wireless transmitter into the unit and
the wireless transceiver into the S-AIR sub unit.
Note
• When you insert the wireless transmitter/transceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
To insert the wireless transmitter
into the unit
1
Remove the screws and detach the slot
cover.
Rear of the unit
SPEAKER
FRONT R FRONT L SUR R
TV
SPEAKER
DIGITAL IN HDMI OUT
OPTICAL COAXIAL
CENTER SUBWOOFER
Slot cover
Note
• Remove the screws from the slot cover bearing
the caution mark. Do not remove other screws.
• The slot cover is no longer necessary; however,
keep it after detaching.
2
Insert the wireless transmitter.
Rear of the unit
SPEAKER
FRONT R FRONT L SUR R
TV
SPEAKER
HDMI OUT
DIGITAL IN
CENTER SUBWOOFER OPTICAL COAXIAL
ANTENNA
SUR L
COAXIAL 75
FM
EZW-T100
EURO AV
DMPORT
DC5V
0.7A MAX OUTPUT(TO TV)
0
T 1 0
W -
E Z
ANTENNA
SUR L
COAXIAL 75
FM
EZW-T100
EURO AV
DMPORT
DC5V
0.7A MAX OUTPUT(TO TV)