Table of Contents
Advertisement
• To set and use a custom white balance setting, it is advisable to select the
shooting mode and set the exposure compensation and flash exposure
compensation to zero (±0). The correct white balance may not be obtained when
the exposure is incorrect (image is completely black or white).
• It is also desirable to use the LCD monitor to compose the shot and to zoom in to
the maximum telephoto setting.
• Since the white data cannot be read in the
another shooting mode first before selecting the
• If the flash fires when setting a custom white balance with the flash set to auto or
red-eye reduction auto, use the flash when you go to shoot too. The correct white
balance cannot be obtained unless the flash is used consistently. To ensure
consistency, set the flash to on or off as appropriate.
• The selected custom white balance setting will be memorized even when the
camera's power is turned off.
72
Shooting - Selecting Particular Effects
Shoot the image.
5
• If you pressed the shutter button at Step 4,
the white balance mode will reappear after
the shot, allowing you to change the setting
for the next shot.
mode, pre-set the white balance in
mode.
Hide quick links:
Advertisement
Table of Contents
