Attaching The Strap; Attaching The Lens Cap; Using The Soft Case (Optional) - Canon PowerShot G2 (PC1015) Reference Manual

Attaching the Strap

• Avoid waving the camera about or catching it on other items when suspending it
from the strap.

Attaching the Lens Cap

• Attach the lens cap cord to the strap.
• Remove the lens cap before turning on the camera power.

Using the Soft Case (Optional)

28
Preparing the Camera
Pass the tip of the strap up through the
strap eyelet on the camera and then
through the bottom of the buckle on
the strap. Pull the strap tight in the
buckle so that it won't slip. Perform the
same steps on the other side of the
camera.
Fit the lens cap over the lens casing so
that it covers the entire lens. Always
replace the lens cap after use.
The soft case can be used to carry the
camera, CF card and the wireless
controller.
• Optional soft case appearance and
specifications may vary according to region.