Number of Copies
3
Select images for printing.
Single Images
• When the print type (p. 102) is set to
[Standard] or [Both], press the
on the omni selector to select an image and
the
or
can set the number of copies (up to 99) to be
printed at the same time.
• When the print type (p. 102) is set to [Index},
press the
to select an image and mark or remove marks
from images with the
• You can use the same procedures to select
images in index replay (3 images). Press the
button to switch between single replay and
index replay.
All the Images on a CF Card
• Press the
images).
• You can set one copy of each image to print by
pressing the
arrow on the omni selector to select [Mark all],
and pressing the
• When the print type is set to [Standard] or
[Both], the setting for the number of print copies
can be changed for each image. When [Index] is
selected, the print settings can be deleted. For
the instructions for changing settings, please
reread Step 3 from the beginning.
• You can cancel all the settings by selecting
[Clear all].
Press the
4
• The selection mode will turn off and the Print
Order menu will reappear.
arrow to mark it for printing. You
or
arrow on the omni selector
or
button to switch to index replay (3
button, pressing the
button again.
button.
Print Settings (DPOF Settings)
or
arrow
arrow.
or
101