Installation - Electrolux 300 Series Use & Care Manual

12

INSTALLATION

Unpacking the washer
WARNING
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment
grounding conductor can result in a risk
of electrical shock. Check with a licensed
electrician if you are in doubt as to whether
the appliance is properly grounded.
1. Temporarily
remove door tape.
2. Close door and
reapply door tape.
3. Using a rug,
blanket or piece
of cardboard to
protect the floor,
carefully lay the
washer on its back.
IMPORTANT
DO NOT place the washer onto its back
without the shipping bolts.
CAUTION
EXCESSIVE WEIGHT HAZARD
To avoid back or other injury, have more
than one person move or lift the washer.
4. Remove styrofoam base and shipping
plug and set them aside.
5. Carefully return
the washer
to an upright
position.
6. Carefully move the washer to within 4
feet (1 m) of its final location.
WARNING
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment
grounding conductor can result in a risk
of electrical shock. Check with a licensed
electrician if you are in doubt as to whether
the appliance is properly grounded.
IMPORTANT
Save styrofoam base and shipping plug
for use to help prevent washer damage
during any future moves.
IMPORTANT
DO NOT tip washer upside down onto its
top or onto its right side for any reason.