Sony VPL-PX20 Operating Instructions Manual page 23

To decrease the number, press the m or < key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the M or m key to change the setting.
Press the ENTER or < key to restore the original
screen.
CONTRAST
Adjusts the picture contrast.
The higher the setting, the greater the contrast.
The lower the setting, the lower the contrast.
BRIGHT
Adjusts the picture brightness.
The higher the setting, the brighter the picture.
The lower the setting, the darker the picture.
COLOR
Adjusts color intensity.
The higher the setting, the greater the intensity.
The lower the setting, the lower the intensity.
HUE
Adjusts color tones.
The higher the setting, the picture becomes greenish.
The lower the setting, the picture becomes purplish.
SHARP
Adjusts the picture sharpness.
The higher the setting, the sharper the picture.
The lower the setting, the softer the picture.
RGB ENHANCER
Adjusts the picture sharpness when the RGB signals
are input.
The higher the setting, the sharper the picture.
The lower the setting, the softer the picture.
D. (Dynamic) PICTURE
Emphasizes the black color.
ON: Emphasizes the black color to produce a bolder
"dynamic" picture.
OFF: Reproduces the dark portions of the picture
accurately, in accordance with the source signal.
.........................................................................................................................................................................................................
1) The RGB signals of a computer
GAMMA MODE
Selects a gamma correction curve.
GRAPHICS: Improves the reproduction of half
tones. Photos can be reproduced in natural tones.
TEXT: Contrasts black and white. Suitable for
images that contain lots of text.
COLOR TEMP
Adjusts the color temperature.
HIGH: Makes the white color bluish.
LOW: Makes the white color reddish.
COLOR SYS (System)
Selects the color system of the input signal.
AUTO: Automatically selects one of the following
signals: NTSC , PAL, SECAM, NTSC
3.58
PAL-M/N: Automatically selects one of the
following signals: PAL-M/PAL-N, NTSC
Normally, set to AUTO.
If the picture is distorted or colorless, select the color
system according to the input signal.
Input signals and adjustable/setting items
Item
Video or Compo-
S video (Y/C) nent
CONTRAST
BRIGHT
COLOR
HUE
(NTSC3.58/
4.43 only)
SHARP
RGB –
ENHANCER
D. PICTURE
(15k 60/50 only)
GAMMA –
MODE
COLOR
TEMP
COLOR
SYS
: Adjustable/can be set
– : Not adjustable/can not be set
The PICTURE CTRL Menu
.
4.43
.
3.58
Input signal
HDTV RGB 1) B&W
– –
– –
–
– – –
– –
– – –
– – –
23
(GB)