Toshiba SD-V392SU2 Owner's Manual page 15

DVD/VCR to TV connection
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the
connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
75 ohm Coaxial Cable (supplied)
75 ohm Coaxial Cable
(supplied)
75 ohm Coaxial Cable
(supplied)
J2D81001A (E)p14-17.p65
Splitter 75 ohm Input
75/300 ohm outputs
(not supplied)
Splitter 75 ohm Input
300 ohm outputs
(not supplied)
15
TV
Note: If a VHF or UHF antenna is used,
set the TV/CABLE menu option to
the "TV" mode.
VHF/UHF IN
TV with single 75 ohm VHF/UHF antenna
input
TV
Note: If a VHF or UHF antenna is used,
set the TV/CABLE menu option
UHF
to the "TV" mode.
VHF
TV with 300 ohm UHF and 75 ohm VHF
antenna inputs
TV
Note: If a VHF or UHF antenna is used,
UHF
set the TV/CABLE menu option to
the "TV" mode.
VHF
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
28/5/04, 1:52 PM
15