Icom IC-A220T Instruction Manual page 16

3
MEMORY OPERATION
D Enter frequencies into memory channels
To enter frequencies into memory channels, follow the steps
below.
q Rotate [DIAL] and [O-DIAL] to set the standby frequen-
cy.
w Push [RCL] to enter the memory mode.
• The memory channel number is displayed.
• The memory channel name is also displayed if it has been
entered.
e Rotate [O-DIAL] to select a memory channel.
• Select a regular memory channels or a group memory
channels.
• For the group memory channel, push [DIAL] and then rotate
[O-DIAL] to select a group.
r Push [MEM] and then
rotate [O-DIAL] to select
"REPLACE."
• The channel number blinks.
• For the group memory channel, push [DIAL], [MEM] and then
rotate [O-DIAL] to select
"REPLACE."
t Rotate [DIAL] to select a
channel to be entered.
y Push [MEM] to enter the frequency into the channel.
• "WRITE COMPLETED" is displayed when the regular memory
channel is entered.
u Push [RCL] to exit the memory mode.
9
MEMORY
128.000
122.00
REPLACE Ç
127.000
CH01
MEMORY
128.000
122.00
REPLACE Ç
127.000
CH02
D Clearing the memory contents
You can clear unwanted memory channels.
q Push [RCL] to enter the memory mode.
• The memory channel number is displayed.
• The memory channel name is also displayed if it has been
entered.
w Rotate [O-DIAL] to select a memory channel.
• Select a regular memory channel or a group memory channels.
• For the group memory channel, push [DIAL] and then rotate
[O-DIAL] to select a group.
e Rotate [DIAL] to select a channel.
r Push [MEM] and then rotate [O-DIAL] to select "DELETE."
• The channel number blinks.
• For the group memory channel, push [DIAL], [MEM] and then
rotate [O-DIAL] to select "DELETE."
122.00
t Push [MEM] to clear the memory channel data.
122.00
y Push [RCL] to exit the memory mode.
MEMORY
127.000
ÅDELETE Ç
127.000
CH01
MEMORY
CH01