Technical Data; Specified Conditions Of Use; Maintenance - Milwaukee M12 BI User Manual

TECHNICAL DATA

Battery voltage
Input power
Max pressure
Air delivery rate @ 0 psi / 0 bar / 0 kPa
Air delivery rate @ 35 psi / 2.41 bar / 241 kPa
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Pressure hose length
Weight without battery
Weight according to EPTA-Procedure 01/2003 (Li-ion 2.0 – 6.0 Ah)
WARNING! Read
instructions, illustrations,
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
fire, and/or serious injury.
Save all warnings and instructions for future
reference.
INFLATOR SAFETY WARNINGS
Always wear goggles and ear protection when using
the product.
Do not leave the product unsupervised when it is
switched on.
Never direct any compressed air or blow any dust
toward people or animals.
Do not use the product in rooms with a potentially
explosive atmosphere.
Risk of bursting. Do not overinflate. Follow all
manufacturer's instructions for the item. Do not set the
product to an output pressure greater than the marked
maximum pressure of item to be inflated.
Never block or plug the air outlet during operation.
Check air hose for wear or damage before each use.
Check all accessory connections are secure.
This product can be used by children aged from 8
years and above and persons with reduced physical,
sensory, or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the product in a safe way
and understand the hazards involved.
Children shall not play with the product.
Cleaning and user maintenance shall not be made by
children without supervision.
Have damage repaired immediately by an authorised
workshop.
all safety warnings,
and specifications
13
M12 BI
12 V
120 W
120 psi; 8.27 bar; 827 kPa
24.9 l/min
17.8 l/min
-18°C – +50°C
M12B
C12C; M12C4; M12-18
66 cm
1.42 kg
1.59 – 1.83 kg
Following 10 minutes of continuous operation, a short
break of at least 10 minutes must be taken to allow the
product to cool down.
Remove the battery pack before starting any work on
the product.
To avoid injury and damage, never immerse the
product, removable battery, or charger in liquid or
allow liquid to penetrate them.
Use only System M12 chargers for charging System
M12 battery packs. Do not use battery packs from
other systems.
Never break open battery packs and chargers and
store only in dry rooms. Keep dry at all times.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal
injury, and product damage due to a short circuit,
never immerse your product, battery pack, or charger
in fluid or allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial
chemicals, and bleach or bleach-containing products,
etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The inflator is intended to inflate items such as car tires,
bike tires, lawn equipment tires, sports equipment, air
mattresses, beach toys, and other inflatables.
Do not use this product to fill air tanks or shocks. Do
not use this product as a breathing device. Do not use
this product to spray chemicals.

MAINTENANCE

Remove the battery pack before starting any work on
the product.
The ventilation slots of the product must be kept clear
at all times.
13
English