Focus And Shoot; Reviewing An Image Right After Shooting - Canon PowerShot A560 Basic User's Manual

4.

Focus and shoot.

1. Press the shutter button halfway
to focus.
When the camera focuses
automatically, the camera beeps
twice and the indicator lights green
(orange when using the flash). Also,
the AF frame appears in green on
the LCD monitor at the point where the camera is focused.
2. Press the shutter button fully to
shoot.
The shutter sound will play and the
image will record. The indicator will
blink green while the image is
recorded to the memory card.

Reviewing an Image Right After Shooting

After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET or DISP. button while the image is
displayed in the LCD monitor.
To stop displaying the image, press the shutter button halfway.
10
See Selecting a Shooting Mode (p. 11).
See Indicators (p. 4).
See the Advanced Guide: Selecting an AF Frame (p. 40).
See the Advanced Guide for the various shooting methods available.
Indicators
Indicators
See the Advanced Guide: Review (p. 21).
See Erasing (p. 18).