Canon PowerShot A560 Basic User's Manual page 20

1.
Press the
The last recorded image will display. If you have
played back images between shooting sessions
however, the last image viewed will display (Resume
Playback) instead of the last recorded image. If the
memory card has been switched, or the images on
the memory card have been edited with a computer,
the newest image on the memory card appears.
2.
Use the
Use the
move to the next image.
Holding the button down advances the images more rapidly, but shows
them less clearly.
1.
In the playback mode, use the
an image to erase (a) and press the
2.
Confirm that [Erase] is selected and
press the FUNC./SET button (c),
To exit instead of erasing, select [Cancel].
Please note that erased images cannot be
recovered. Exercise adequate caution before
erasing an image.
18
Playback
/ button (a).
or button to display the image you wish to view (b).
button to move to the previous image and the
See the Advanced Guide for the various playback methods available.
Erasing
or
See the Advanced Guide: Erasing All Images (p. 73).
button to
button to select
button (b).