Table of Contents
Advertisement
2.2 Front Suspension
2.2.1 Springs and Spring Mounting
WARNING: Do not modify, drill, cut or
weld any suspension components,
specifically the steering gear system,
subframe or anti-roll bars, springs or
shock absorbers including mounting
brackets.
CAUTIONS:
When carrying out welding work the
springs must be covered to protect them
against weld splatter.
Do not touch springs with welding
electrodes or welding tongs.
Make sure that components loosened or
removed and reinstalled are properly
reassembled and the torque set in
accordance with manufactures
requirements.
NOTE: Do not modify the wheelbase or add any
type of frame extension to vehicles fitted with
Electronic Stability Control, ESC (also known as
Electronic Stability Program, ESP).
NOTE: Do not damage the surface or corrosion
protection of the spring during disassembly and
installation.
NOTE: For detailed information please contact
the Vehicle Converter Advisory Service at
VCAS@ford.com
Date of Publication: 04/2012
38
FORD TRANSIT CUSTOM 2012.75
Advertisement
Table of Contents
