Table of Contents
Advertisement
5.7 Seats
NOTE: When reassembling the seat and the seat
belt use specified bolts and ensure to apply the
specified torque. For torque specifications contact
your local Ford dealer or the Vehicle Converter
Advisory Service at VCAS@ford.com
5.7.1 Van
CAUTION: Do not install seats in the rear
cargo area of a van.
5.7.2 Windowed Van
The body and floor of a windowed van are not
equipped with the appropriate reinforcements
required for Original Equipment Manufacturers
(OEM) rear seats and seat belt systems. Do not
install original rear seats or rear seat belts.
Date of Publication: 04/2012
166
For installation of non OEM rear seats, the rear
seats and seat belt systems need to comply with
the relevant legal requirements and ECE directives.
Refer to: 3.6 Exhaust System (page 52).
Vehicle Exhaust Systems - Vans with Bulkheads.
5.7.3 Heated Seats
WARNING: The electrical feed for the
original heated Ford seat must not be
used for other purposes, e.g. other
electrical consumers.
It is not advisable to retrofit heated seats due to
potential airbag operation or malfunction
(incorrect configuration).
5.7.4 Rear Seat Fixing Positions
The following figure shows the second and third
row seat fixing positions in the floor. These
positions are independent of the wheelbase.
FORD TRANSIT CUSTOM 2012.75
Advertisement
Table of Contents
