Sony Bravia KDL-40X4500 Operating Instructions Manual page 37

Reset
Backlight
Contrast
Brightness
Colour
Hue
Colour Temperature
Sharpness
Noise Reduction
MPEG Noise
Reduction
DRC Mode
DRC Palette
Advanced Settings
Photo-Vivid For viewing photographs. Enhances picture contrast and
sharpness.
Photo-Standard For viewing photographs. Provides the optimum picture
quality for viewing in the home.
Photo-Original
For viewing photographs. Represents the picture quality used
when imaging developed photographs.
Photo-Custom For viewing photographs. Allows you to store your preferred
settings.
Resets all the "Picture" settings to the factory settings excluding "Target Inputs",
"Picture Mode" and "Advanced Settings".
Adjusts the brightness of the backlight.
Increases or decreases picture contrast.
Brightens or darkens the picture.
Increases or decreases colour intensity.
Increases or decreases the green tones and red tones.
~
• "Hue" can be adjusted only for the NTSC colour signal (e.g. U.S.A. video tapes).
Adjusts the whiteness of the picture.
Cool Gives white colours a blue tint.
Neutral Gives white colours a neutral tint.
Warm 1/Warm 2
Gives white colours a red tint. "Warm 2" gives a redder tint
than "Warm 1".
z
• "Warm 1" and "Warm 2" are not available when "Picture Mode" is set to "Vivid"
(or "Photo-Vivid").
Sharpens or softens the picture.
Reduces the noise level of pictures (snowy pictures).
Auto Automatically reduces picture noise (in analogue TV mode,
or composite, S video or DMPORT input signals only).
High/Medium/ Modifies the effect of the noise reduction.
Low
Off
Turns off the "Noise Reduction".
Reduces picture noise in MPEG-compressed videos. This is effective when
viewing a DVD or digital broadcast.
Produces a high-resolution picture for high-density sources (e.g., Blu-ray disc
player, DVD player, satellite receiver).
Mode 1 Recommended mode.
Mode 2 Only available for 1080i format. "Mode 2" is especially
effective when original standard-definition signals have been
up-converted to 1080i format.
Off
Turns off the "DRC Mode".
Customises the level of detail ("Reality") and smoothness ("Clarity") of pictures
from each input source. For example, you can create a custom setting for a cable
input source, and another for a DVD player.
Press F/f/G/g to adjust the position of the marker (z).
As you move the z higher along the "Reality" axis, the picture becomes more
detailed. As you move the z to the right along the "Clarity" axis, the picture
becomes smoother.
Allows you to set "Picture" settings in more detail. These settings are not available
when "Picture Mode" is set to "Vivid" (or "Photo-Vivid").
Reset Resets all the advanced settings to the factory settings.
37
(Continued)
GB