Mercedes-Benz S-Class 2009 Owner's Manual page 183

bjanott,
Automatic air conditioning
180
i
Condensation may collect on the under-
side of the vehicle when the cooler is oper-
ating.
Open the air-conditioning main menu via
X
the air-conditioning function bar.
To switch on: select Æ and press W.
X
To switch off: select Æ and press W.
X
A tick appears.
Controlling the air conditioning cen-
trally
You can use the Mono function to set all the
air-conditioning zones in the vehicle to the
same settings. If the Mono function is
switched on and you adjust the air condition-
ing on the driver's side, these changes will
also be made in all the air-conditioning zones.
Open the air-conditioning main menu via
X
the air-conditioning function bar.
Select Mono and press W.
X
A tick appears when the function is selec-
ted.
The Mono function is automatically switched
off if you:
Version: 2.11.7.7
change settings for the automatic air-con-
R
ditioning system on the front-passenger
side using COMAND.
press a rocker switch to operate the auto-
R
matic air-conditioning system on the front-
passenger side.
press one of the rocker switches on the
R
rear-compartment control panel*.
Adjusting the footwell temperature
You can use the Footwell temperature
function to set the temperature difference
between the footwell and the rest of the vehi-
cle interior.
i
This setting is quite effective in automatic
mode, especially at low outside tempera-
tures.
The greater the value you set, the higher the
temperature in the footwell.
Open the air-conditioning main menu via
X
the air-conditioning function bar.
Select Footwell temperature and press
X
W.
A scale appears.
To change the temperature difference:
X
slide ZVÆ or turn cVd.
To confirm your selection: press W.
X
* optional