Mercedes-Benz S-Class 2009 Owner's Manual page 169

bjanott,
Navigation system* (destination memory)
166
Displaying My address
Select Navi Q Destination Q From
X
memory Q My address.
The destination memory list appears either
with or without the input speller. Whether
or not the input speller is displayed
depends on the number of entries in the
destination memory. The input speller is
automatically activated in the destination
memory list with an input speller.
The My address entry is automatically
highlighted in the list without an input
speller.
Destination memory with input
X
speller: slide ZVÆ
input speller disappears.
The My address list entry is automatically
highlighted unless you have entered a char-
acter using the input speller.
If characters have been entered using
X
the input speller: turn
repeatedly until the My address list entry
is highlighted.
Press the W button.
X
or
Destination memory list without the
X
input speller: press W
If you have already stored your own
address information, you will see the menu
for starting route guidance using your own
address for the address data when you
press W, regardless of whether the input
speller is displayed or not.
To exit the menu: select Back.
X
Assigning data for the first time/edit-
ing My address
Select Navi Q Destination Q From
X
memory.
You will see the destination memory list
with or without the input speller, depending
on the number of entries in the destination
memory. The input speller is automatically
repeatedly until the
cVd or slide ZV
Version: 2.11.7.7
activated in the destination memory list
with the input speller.
The My address entry is automatically
highlighted in the list without the input
speller.
Destination memory with the input
X
speller: slide ZV repeatedly until the input
speller disappears.
The My address list entry is automatically
highlighted unless you have entered a char-
acter using the input speller.
If characters have been entered using
X
the input speller: turn
repeatedly until the My address list entry
is highlighted.
Press the W button.
X
or
Destination memory list without the
X
input speller: press W
Subsequent operation depends on whether
you enter the address manually or wish to
use an address book entry for My address.
Entering an address manually
To assign data to My address for the
X
first time: select Save with name.
or
To edit My address: select Edit Q
X
Save with name.
In both cases, the address input menu
appears.
Enter the address. Proceed in the same way
X
as you would enter a destination as descri-
bed in the "Entering a destination by
address" section (
Y
Select Save after you have entered the
X
address.
Your address is stored.
cVd or slide ZV
page 143).
* optional