Table of Contents
Advertisement
bjanott,
Navigation system* (route guidance)
160
Current vehicle position: the triangle indi-
:
cates the vehicle's direction of travel
Off-road section of the route
;
Off-road destination
=
Shortly before you reach the last known point
on the map, you will see the message Area
of dest. reached and an arrow. The direc-
tional arrow shows the compass heading to
the destination.
Route guidance from an off-road loca-
tion to a destination
The vehicle is in an off-road position if the
digital map does not contain any information
regarding the vehicle position. COMAND is
also able to guide you to a destination even
from such a location. The requirement for this
is that the vehicle position is within the area
covered by the digital map. At the start of
route guidance, you will see the Off road
message and an arrow. The arrow shows the
compass heading to the actual destination.
The route is highlighted blue from the nearest
road known to the system. As soon as the
vehicle is back on a road known to the sys-
tem, route guidance continues in the usual
way.
Route guidance from an off-map loca-
tion to a destination
If the vehicle position is outside the area cov-
ered by the digital map, then the vehicle is in
an off-map location. COMAND is also able to
guide you to a destination even from such a
location. At the start of route guidance, you
Version: 2.11.7.7
will see the Off map message and an arrow.
The arrow shows the compass heading to the
actual destination. The route is highlighted
blue from the nearest road known to the sys-
tem. As soon as the vehicle is back on a road
known to the system, route guidance contin-
ues in the usual way.
Off-road position during route guidance
Due to road construction work, for example,
there may be differences between the data
on the digital map and the actual course of
the road. In such cases, the system will tem-
porarily be unable to locate the vehicle posi-
tion on the digital map and thus considers the
vehicle to be in an off-road position. The Off
road message and an arrow indicating the
compass heading to the destination appear in
the display. As soon as the system can assign
the vehicle position to the map again, route
guidance continues in the usual way.
Navigation announcements
i
Audible navigation announcements are
muted during a telephone call.
If you have missed an announcement, you can
call up the current announcement at any
time.
To call up a current announcement:
X
select Navi Q +.
or
Press the h programmable button if the
X
button has been programmed with this
function (
page 172).
Y
To switch off navigation announce-
X
ments: press and hold the 8 button on
the multi-function steering wheel.
i
The announcements remain switched
off even if you start a new route guidance
or if COMAND is switched off and on with
the u button. The announcements are
automatically switched back on if you
switch COMAND off by removing the key
* optional
Advertisement
Table of Contents
