Daikin Altherma 3 R F User Reference Manual page 51

EBVZ16S18+23DJ
Daikin Altherma 3 R F
4P643608-1 – 2021.09
a
a WLAN cartridge
WLAN module
b Router
c Smartphone + app
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface:
D
User profile
Operation
Wireless gateway
Malfunctioning
Room
[D.1] Mode: Turn AP mode ON (= WLAN cartridge active as access point):
1 Go to [D.1]: Wireless gateway > Mode.
2 In the Enable AP mode screen, select Yes.
[D.2] Reboot: Reboot the WLAN cartridge:
1 Go to [D.2]: Wireless gateway > Reboot.
2 In the Reboot the gateway screen, select OK.
[D.3] WPS: Connect the WLAN cartridge to the router:
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the Daikin Residential Controller app.
1 Go to [D.3]: Wireless gateway > WPS.
b c
The WLAN cartridge needs to be inserted in the
user interface.
The WLAN module needs to be installed by the
installer on the indoor unit (on the inside of the
front panel).
Field supply.
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
[D] Wireless gateway
[D.1] Mode
[D.2] Reboot
[D.3] WPS
[D.4] Remove from cloud
[D.5] Home network connection
[D.6] Cloud connection
5 Operation
|
User reference guide
51