Marantz NR1200 Quick Start Manual page 17

w Use ui to select the network, then press ENTER.
(Use o to select "Rescan" if your network name is not listed.)
w Make sure your iOS device is connected to your Wi-Fi Network. Select the
network named "Marantz NR1200" from the Settings/Wi-Fi screen on your
device.
w Switch to the WPS mode by pressing the WPS button of the router you
wish to connect to.
w Use ui to select "SSID" and press ENTER, enter the name
(SSID) of the network, then select "OK" which is at the end of the
character table. For how to input, check Page 18.
SSID
Marantz NR1200
e Use ui to select "Sec" and press ENTER, then use o p to select
the encryption method according to the setting of access point.
Sec : WPA2(AES)
NR1200
CEOL
16