Whirlpool UDT518SAHP Installation Instructions Manual page 5

Undercounter dishwasher
Hide thumbs Also See for UDT518SAHP:
Table of Contents

Advertisement

Available languages

Available languages

Other Parts Needed (not provided):
Call us at our toll-free number, visit our website listed in the
User Guide for part numbers above, or see local electrical/
plumbing supply retailer for equivalent.
First-Time Installations
Check local codes. Check existing electrical supply. See the
"Electrical Requirements" section. It is recommended that
electrical connections be made by a licensed electrical installer.
Additional Tools Needed:
Small tubing cutter
®
TEFLON is a registered trademark of Chemours.
Household Wiring (Metallic)
Strain Relief
to fit 7/8" (22 mm) hole
(required to properly secure
household wiring to the
dishwasher terminal box)
(Whirlpool Part
Number 4396672)
NOTE: Use only UL Listed/
CSA Approved part.
Twist-On Wire Connectors
NOTES:
Confirm proper size for
connecting your gauge
of household wiring to
the 16-gauge wiring in
the dishwasher.
Use only UL Listed/CSA
Approved parts.
TEFLON
Tape or Sealing
®†
Compound
90° elbow
Tube fittings
(for copper tubing)
Wire stripper
Cordless drill
Additional Parts Needed (not provided):
Call us at our toll-free number, visit our website listed in the
User Guide for part numbers above, or see local plumbing supply
retailer for equivalent.
NOTE: If using a flexible braided hose, replace inlet hose after
5 years to reduce the risk of hose failure. Record hose installation
or replacement dates on the hose for future reference.
For Direct Wire
Cabinet Grommet
For 1
/
" (38 mm) hole
1
2
in cabinet. (Whirlpool
Part Number 302797)
NOTE: Required for metal
cabinets
Call us at our toll-free number, visit our website listed in the User
Guide for part numbers above, or see local electrical supply
retailer for equivalent.
1/2", 3/4", and 1
/
" hole
1
2
saw bits
Copper Tubing (3/8" O.D.
suggested) or Flexible
Braided Water Supply
Line Kit (Whirlpool Part
Number W10278635RP).
Kit includes braided hose
and 3/8" compression x
3/4" hose fitting.
Hose Clamps 1
/
"- 2"
1
2
(38-50 mm) (3 maximum)
For Power Cord
Power Cord Kit
Kit typically includes
power cord, metallic strain
relief, grommet, and twist-on
wire connectors. (Whirlpool Part
Number 4317824)
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wdf518sahmWdf518sahwWdf518sahbW11160365b

Table of Contents