Table of Contents
Advertisement
Basics
5
Configure the IP settings.
• W hen using DHCP, select Obtain an IP address
automatically.
• W hen not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select Use the
following IP address and set the IP address manually.
6
Select OK to save the settings.
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a magic packet command, is received via a wired LAN.
1
On the desktop, right-click the Start button ( ) and select
Control Panel → Network and Internet → Network and
Sharing Center → Change adapter settings.
2
Right-click Ethernet and select Properties.
3
Select Configure... → Power Management → Allow this
device to wake the computer → OK.
4
Restart the computer.
• I f the computer wakes up from sleep mode inadvertently,
disable the Wake on LAN feature.
• T his feature may not work while using other power saving
features. To disable other sleep functions, right-click the
Start button ( ) and select Control Panel → Hardware
and Sound → Power Options.
24
Advertisement
Table of Contents
