Table of Contents
Advertisement
4
When "Please Power Off!" appears on the front display, press z (power) to set the unit to
standby mode and turn it on again.
If "Failed" appears on the front display, check the following and start the process again.
In case of "BACKUP":
• You cannot overwrite save. When you save the settings repeatedly, please move the file in
different folder.
• The file is stored by the name of "MC_backup_(model name).dat" in the root of the USB
memory device.
In case of "RESTORE":
• Check that the file is stored in the route of the USB memory device.
Y
• "RESTORE" is effective after backuping all the settings.
• Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be
restored correctly.
• The user information (such as account, password) is not saved.
Restoring the default settings (INITIALIZE)
INITIALIZE
CANCEL
Restores the default settings for the unit.
Choices
VIDEO
Restores the default settings for video configurations.
ALL
Restores the default settings for the unit.
CANCEL
Does not perform an initialization.
Updating the firmware (FIRM. UPDATE)
FIRM. UPDATE
New firmware that provides additional features or product improvements will be released as
needed. Updates can be downloaded from the Yamaha website. If the unit is connected to the
Internet, you can download the firmware via the network. For details, refer to the information
supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure you read the
information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to start firmware
update.
Choices
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
X
If the unit detects newer firmware over the network, the corresponding message will be displayed after SETUP is
pressed. In this case, you can also update the unit's firmware by following the procedure in "Updating the unit's
firmware via the network" (p.142).
Checking the firmware version (VERSION)
VERSION
Check the version of firmware currently installed on the unit.
X
• You can also check the firmware version in "Information" (p.123) in the "System" menu.
• It may take a while until the firmware version is displayed.
141
En
USB
x.xx
Advertisement
Table of Contents
