1050 M.2 Solid-State Drive - Lenovo ThinkPad P15v Gen 2 Hardware Maintenance Manual

1050 M.2 solid-state drive

For access, remove this FRU:
• "1020 Base cover assembly" on page 64
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge of the M.2 solid-state drive. Otherwise the M.2 solid-state drive might get
damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
Removal steps of the M.2 solid-state drive
Step Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (1)
When installing:
• Attach the thermal pad under the solid-state drive.
• Ensure that the connector is attached firmly.
For computer models with an FCC (Factory Color Calibration) panel, the panel is color calibrated at factory
and a file containing all the color settings is installed on the computer's secondary storage device. After an
Color Torque
Black 0.18 +/- 0.015 Nm
(1.85 +/- 0.15 kgf-cm)
.
Chapter 8 Removing or replacing a FRU
67