1050 M.2 Solid-State Drive And M.2 Solid-State Drive Bracket (For Amd Models Only) - Lenovo T14 Gen 3 Hardware Maintenance Manual

Step Screw (quantity)
1
M2.0 × 2.5 mm, flat-head, nylon-coated (1)
For computer models with the factory color calibration feature, if the operating system is reinstalled after the
storage drive replacement, do the following to reinstall the color profiles:
1. Connect your computer to the network and open the preinstalled X-Rite Color Assistant app.
Note: If the app is uninstalled, reinstall it by downloading the installation package from
pcsupport.lenovo.com/us/en/downloads/DS543953
2. Go to Settings ➙ Restore profiles. The app will download and install its unique color profiles from
Lenovo cloud automatically.
1050 M.2 solid-state drive and M.2 solid-state drive bracket (for AMD
models only)
For access, remove this FRU:
• "1020 Base cover assembly" on page 67
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
If your computer is installed with a hybrid solid-state drive (with Intel Optane memory), go to
support.lenovo.com/docs/tg_ssd
Removal steps of the M.2 2280 solid-state drive, bracket and thermal pad
• Type 1
to know the details on how to replace it.
Color Torque
Black 0.18 +/- 0.015 Nm
(1.85 +/- 0.15 kgf-
cm)
https://
https://
.
Chapter 8 Removing or replacing an FRU
71