Table of Contents
Advertisement
Indications
Messages
CANNOT RECORD.
NO DATA.
THIS DISC IS
INCOMPATIBLE.
PLEASE CHECK THE
DISC.
RECOMMENDED TO USE
PANASONIC DISC
CANNOT RECORD.
(THIS DISC IS FINALIZED)
CANNOT RECORD. DISC
IS FULL.
CANNOT RECORD. THE
NUMBER OF SCENES HAS
EXCEEDED THE MAXIMUM
LIMIT.
CANNOT OPERATE.
TEMPERATURE IS HIGH.
PLEASE TURN OFF AND
WAIT A WHILE.
CANNOT UN-FINALIZE
THIS DISC.
PUSH THE RESET
SWITCH.
CHANGE TO MANUAL
MODE.
CANCEL MAGICPIX MODE.
TURN OFF THE VIDEO
LIGHT.
82
LSQT1040
Data writing to the disc has failed.
There are no images recorded on the disc.
You inserted an incompatible disc (copy-protected discs, etc.).
You inserted a disc that cannot be read on this unit (a disc
recorded in PAL video format etc.).
You inserted a disc that does not meet the DVD standard for
quality and performance so you may not be able to record
normally. Refer to the following support site for information
about discs that have been confirmed as compatible by
Panasonic.
http://panasonic.co.jp/pavc/global/cs/e_cam
(This website is in English only.)
A finalized DVD-RW (Video format) or DVD-R has been
inserted. After finalizing, the discs become play-only and cannot
record. If you un-finalize a DVD-RW (Video format), it can be
used for recording. (l 71)
The disc is full or the number of scenes has reached the
maximum limit so no further data can be recorded. Delete
unnecessary scenes (l 56) or insert a new disc.
The temperature of the unit is high so it cannot be operated.
Turn off the power, wait until the unit cools and then turn on the
power again.
DVD-R cannot be un-finalized.
DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR
format) after finalization can be recorded and edited in the same
way as DVD-RW (VR format) before finalization.
An irregularity in the unit has been detected. Press the RESET
button to restart the unit. (l 88)
You are attempting to use a function that cannot be used
simultaneously.
Hide quick links:
Advertisement
Table of Contents
