Table of Contents
Advertisement
Listening to music on your cellphone
Setting the pair
In order to establish the wireless connection between the receiver and Bluetooth cellphone, the receiver and
cellphone pair must first be registered.
Before operating the units, check the following points.
• Has the pairing of the receiver and cellphone you are about to use been registered? (Refer to page 18.)
Press and hold the MIC button on the receiver for 2 seconds.
The receiver's power is turned on, and its lamp (red) starts blinking slowly.
Establish the "audio" connection by performing the Bluetooth
connection operation on your cellphone.
Perform the audio playback operation using the above cellphone.
When the pair setting is completed, the receiver's lamp (blue) starts blinking slowly.
• Perform the operation for transmitting to the Bluetooth device.
• The receiver starts receiving, and the playback sound can be heard through
the earphones.
Note:
• For further details on the Bluetooth connection, refer to the operating
instructions of your cellphone.
Audio
21
Advertisement
Table of Contents
