Listening to music on your iPod
Setting the pair
As soon as the receiver and transmitter power are turned on, the pair setting is performed automatically.
Connect the transmitter to the dock
connector on the bottom of the iPod
®
• The iPod
's power is now automatically turned on.
Press and hold the MIC button on the
receiver for 2 seconds.
• The receiver's power is now turned on, and the lamp
(red) blinks slowly.
Press and hold the Transmitter button on
the transmitter for 2 seconds.
• The transmitter's lamp (red) starts blinking rapidly, and
when the pair setting is completed, the lamps (blue)
on the transmitter and receiver start blinking slowly to
indicate that the pair setting has been completed.
Note:
• To establish pairing again after pairing has been
released or the transmitter's power was turned
off, press and hold the Transmitter button on
the transmitter for 2 seconds. The pair setting is
restored.
®
.
®
15