Connecting The Antennas And Ac Power Supply Cord; Conserving Power; The Remote Control - Panasonic SC-PM91D Operating Instructions Manual

STEP
Connect the AC power supply after all other connections are complete.

Conserving power

The unit consumes power (approx. 0.4 W) even when it is turned off with [^]. To save power when the unit is not to be used for a long
time, unplug it from the household AC outlet. You will need to reset some memory items after plugging in the unit.
AM loop antenna
Stand the antenna up on its
base.
Keep loose antenna cord
away from other wires and
cords.
STEP
Remote control
8
3

Connecting the antennas and AC power supply cord

AM loop antenna
AM ANT
EXT LOOP
R
SUBWOOFER
OUT
OPTICAL
OUT
S-VIDEO
OUT
4

The remote control

Batteries
R6/LR6, AA
• Insert so the poles (+ and –)
match those in the remote
control.
• Do not use rechargeable type
batteries.
FM indoor antenna
FM ANT
75Ω
AUX
L
AC IN
HIGH (6Ω) LOW (6Ω)
SPEAKERS (SB-PM91)
HAUT-PARLEURS
VIDEO
OUT
P P Y
R B
COMPONENT VIDEO OUT
■ Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store batteries in a cool, dark place.
■ Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
(23 feet) directly in front of the unit.
AC power supply cord
FM indoor antenna
Fix the other end of the antenna where
reception is best.
Adhesive tape
AC power supply cord
To household AC outlet
(AC 120V, 60 Hz)