How To Use Accessories - Eureka NEU200 Series Owner's Manual

C A U T I O N
!
When using tools, always place handle in
upright position. Make sure vacuum
cleaner is turned off while attaching tools.
• Place vacuum in upright position.
• Turn height adjustment knob to highest
position.
• Pull up on hose connection to release hose end
from hose inlet (Fig. 1).
• Push end of hose into top of handle and twist
clockwise until it clicks (Fig. 2).
• Press handle release latch and pull out handle
with wand (Fig. 3).
• To attach accessories, push desired tool onto
end of wand (Fig. 4).
• To use accessories without handle and wand, push
desired tool directly onto end of hose (Fig. 5).
• When finished using accessories, twist hose
counterclockwise and pull off handle. Slide
handle into top of vacuum cleaner and push
down until it clicks. Push loose end of hose
securely onto hose inlet. Store tools on vacuum
cleaner back. (See page 5.)
Crevice tool – Use for baseboard
edges, corners, detailing chairs,
sofas, dryer vents and tight
spaces.
8
Eureka Customer Service HELPLINE 1-800-282-2886

How to use accessories

Upholstery tool –
Use for furniture, chairs,
sofas and mattresses.
Accessories may vary depending on which model was purchased.
1
3
4
5
Dusting brush – Use for
furniture, drapes, blinds,
drawers and vents.
2
Click!
Turbo brush – Use to remove
pet hair from stairs, carpet and
upholstery.